• Re: TicFilePwd problem

    From Digital Man@VERT to Richard Vonzel on Wed Feb 5 14:13:47 2025
    Re: Re: TicFilePwd problem
    By: Richard Vonzel to Digital Man on Wed Feb 05 2025 03:26 pm

    This is a frequently asked question and the cause is usually that 5D addressing was used in either tickit.cfg or sbbsecho.ini and not in the other. Try adding or removing the domain part of the FTN address from one or the other configuration (i.e. 1:103/705@fidonet is not the same address as 1:103/705).

    I'll give that a try. I don't have tickit.cfg file though, bit in the sbbsecho.ini the uplinks are in 5D format.

    Sorry, correction: tickit.ini
    --
    digital man (rob)

    This Is Spinal Tap quote #38:
    Artie Fufkin: I'm not asking, I'm telling with this. Kick my ass.
    Norco, CA WX: 64.6øF, 73.0% humidity, 0 mph SW wind, 0.01 inches rain/24hrs
    ---
    þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
  • From Gamgee@VERT/PALANTIR to Richard Vonzel on Wed Feb 5 21:28:08 2025
    Richard Vonzel wrote to Digital Man <=-

    This is a frequently asked question and the cause is usually that 5D addressing was used in either tickit.cfg or sbbsecho.ini and not in the other. Try adding or removing the domain part of the FTN address from
    one or the other configuration (i.e. 1:103/705@fidonet is not the same address as 1:103/705).

    I'll give that a try. I don't have tickit.cfg file though, bit in
    the sbbsecho.ini the uplinks are in 5D format.

    Your tickit config is contained in ../ctrl/tickit.ini

    Please note the warning in there that you must define *EITHER* a "Dir"
    or a "Path" keyword for each connected file area, but *NOT* both. Very
    common config error...

    Also double-verify that you have a TIC password defined in the uplink
    node's configuration block in sbbsecho.ini



    ... HAL 9000 - Dave. Put down those Windows disks. Please, Dave.
    --- MultiMail/Linux v0.52
    þ Synchronet þ Palantir BBS * palantirbbs.ddns.net * Pensacola, FL
  • From Richard Vonzel@VERT to Digital Man on Thu Feb 6 08:04:40 2025
    Hello Digital!

    05 Feb 25 14:13, you wrote to me:

    Re: Re: TicFilePwd problem
    By: Richard Vonzel to Digital Man on Wed Feb 05 2025 03:26 pm

    This is a frequently asked question and the cause is usually
    that 5D
    addressing was used in either tickit.cfg or sbbsecho.ini and
    not in the
    other. Try adding or removing the domain part of the FTN
    address from
    one or the other configuration (i.e. 1:103/705@fidonet is not
    the same
    address as 1:103/705).

    I'll give that a try. I don't have tickit.cfg file though, bit
    in the sbbsecho.ini the uplinks are in 5D format.

    Sorry, correction: tickit.ini

    I edited the sbbsecho.ini and removed the @fidonet, @fsxnet and that fixed that issue. Ran TICKIT and all passwords run fine.

    Richard


    --- GoldED+/W64-MSVC 1.1.5-b20180707
    * Origin: The File Cabinet BBS [filecabi.casacam.net:1025] (1:154/110)
    þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net
  • From Gamgee@VERT to alt.bbs.synchronet on Wed Feb 5 09:28:08 2025
    From Newsgroup: alt.bbs.synchronet

    + User FidoNet address: 1:396/4
    From: "Gamgee" <gamgee@PALANTIR.remove-7iq-this>

    To: Richard Vonzel
    Richard Vonzel wrote to Digital Man <=-

    This is a frequently asked question and the cause is usually that 5D addressing was used in either tickit.cfg or sbbsecho.ini and not in the other. Try adding or removing the domain part of the FTN address from
    one or the other configuration (i.e. 1:103/705@fidonet is not the same address as 1:103/705).

    I'll give that a try. I don't have tickit.cfg file though, bit in
    the sbbsecho.ini the uplinks are in 5D format.

    Your tickit config is contained in ../ctrl/tickit.ini

    Please note the warning in there that you must define *EITHER* a "Dir"
    or a "Path" keyword for each connected file area, but *NOT* both. Very
    common config error...

    Also double-verify that you have a TIC password defined in the uplink
    node's configuration block in sbbsecho.ini



    ... HAL 9000 - Dave. Put down those Windows disks. Please, Dave.
    --- MultiMail/Linux v0.52
    þ Synchronet þ Palantir BBS * palantirbbs.ddns.net * Pensacola, FL
    --- Synchronet 3.20c-Linux NewsLink 1.2
    * Vertrauen - Riverside County, California - telnet://vert.synchro.net
    --
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++
    + The FidoNet News Gate (Huntsville, AL - USA) +
    + The views of this user are strictly his or her own. + +++++++++++++++++++++++++++++++++++++++++++++++++++++++

    ---
    This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

    --- Synchronet 3.20c-Linux NewsLink 1.2
    þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net